All posts by Sabre Trucks

Upgrade to Split Angles – the easy way!

Sabre Trucks

13Nov

Since the release of our 28 degree baseplates, we’ve seen more and more of your switching over to Split Angle Truck Setups. So much so that we’ve started offering a Split Angle Upgrade Kit for existing Sabre Longboard Truck owners. Our longboard baseplate and hangers are, and always will be, compatible with each other. This...

Read full strory

The heart of your trucks – bushings

Sabre Trucks

14Jan

Our bushings were the first product we did, before even our trucks, way back in 2008! They still form the heart of our trucks, working together with our washers and bushing seats, to give unmatched lean, turn, rebound and control. Check out the Sabre bushing lineup here!

Read full strory

New – Sabre 28 degree baseplates and Split Angles

Sabre Trucks

13Nov

Here’s an idea we’ve been playing around with for a few years – introducing our new super-slack angle 28 degree baseplates! If you’ve been following Sabre Trucks since our inception, you’ll know that we’ve dabbled with slacker truck angles before. This time however, is different. The Sabre 28 degree baseplate is designed to build a...

Read full strory

New – Sabre Street Trucks

Sabre Trucks

08Feb

We’ve been making “TKP” or regular skate trucks since 2013. This year, it was time to make a few changes. Introducing the new Sabre Street Trucks. 127mm, 153mm, 170mm, 180mm. The Sabre Street Truck is designed for use on “normal” (ie not longboard) decks. They’re perfect for wheelbases under about 18″, and will work on...

Read full strory

The most important part of your trucks

Sabre Trucks

03Aug

“The refinement of such a small part translates into improvements to the essence of all the truck is capable of.” – Pete Connolly This is a pivot cup. Almost every set of longboard and skateboard trucks on the market today has one. Its job is simple: the hanger goes in the hole, and the pivot cup then...

Read full strory

Bushing Upgrade

Sabre Trucks

13Jul

Our entire truck lineup just had a major overhaul in a very important area – bushings and washers. We have been through every truck we produce and re-specced the whole lot with our much loved original Sabre Bushing Formula, poured in the USA to our own custom specifications. One of the unique things about our...

Read full strory

The Next Generation

Sabre Trucks

09Jul

Longboarding is always moving forwards. Skaters learn to hit higher speeds, better lines, brake later, land harder. It’s clear to us that it’s not enough just to keep up with the stresses that skaters put through their trucks. We need to go further and create product that can withstand and enhance tomorrow’s skating. It’s for...

Read full strory

Mk2 Testing – Jooz

Sabre Trucks

10Apr

Teamrider Josh Hughes has been skating our Forged Precision Race Trucks for a little under two years. He is extremely picky about hanger straightness – if it’s not straight, it’s off his board in a flash. This is a shame, as he also likes to jump down stairs and grind stuff. He is still skating...

Read full strory

Forged Mk2 is here!

Sabre Trucks

06Apr

We are proud to finally introduce the second iteration of our Forged Trucks! The Forged Precision Race and Forged Precision Freeride trucks are available now. Both use the new Mk2 Forged Hanger, which improves on the original Sabre Forged Hanger (which was the world’s first forged longboard hanger) in two key areas: 1 – Strength....

Read full strory

New longboard bushing kits!

Sabre Trucks

27Feb

Buying bushings is a bit of a minefield. You have to balance your riding style, how you want your board to feel, your weight and what kind of trucks your longboard has in order to pick the right bushings for your trucks. In an effort to make things easier for you, we’ve added Sabre Longboard...

Read full strory

The fastest trucks in the world…

Sabre Trucks

20Sep

UK Teamrider Pete Connolly is the first person to go over 90MPH on a skateboard in history. This clip shows a morning warm up run, trying out the new line that enabled him to clock a new world speed record of 91mph / 146kph. Pete has been instrumental in the development of Sabre trucks from...

Read full strory

Longboard Bushing Footstops – Available Now

Sabre Trucks

26May

The best ideas are always simple and effective. A lot of pro downhill and freeride skaters use footstops, primarily to keep their front foot on the deck during high-speed toeside slides, or to provide a location point in tuck. We’ve put together a kit that allows you to make a simple footstop from one of...

Read full strory

170mm Forged Precision Trucks – Available now

Sabre Trucks

06Oct

Race wheels have got a lot wider in the last few years. We can now all hold lines we used to only dream about. Narrower hangers gives even more grip. So we have added a 170mm hanger width to our race-winning Forged Precision Trucks. Now you too can experience more lean, more grip, tighter lines...

Read full strory

Longboard chilling in the south of France.

Sabre Trucks

09Aug

Check out this edit  Sabre team rider Fayah Bob with  his Sabre cast precision 170’s and his  bro Lucas Poulain in the south of France on this super fun spot chilling together while the sun rises. These buddies have been skating together for over 5 years and you can feel it in their skating, close and fast....

Read full strory

Yannick Gladow – Sabre rider

Sabre Trucks

20Apr

It’s great to see our German team rider Yannick back from injury. After a lengthy lay off he is back skating again and is hungry to shred on his Forged Sabres.

Read full strory

Jorge Pernes – Welcome to the team

Sabre Trucks

14Dec

We are stoked to announce that we have just added Portuguese ripper Jorge Pernes to the Sabre Trucks team. Anyone that knows or has seen Jorge skate knows he is a total shredder,  with a full all-out balls to the wall approach to DH skating.  He is hooked on the Forged 38 Baseplate combined  the Forged Precision 170mm Hanger,...

Read full strory

Joachpass with Matt Elver

Sabre Trucks

16Oct

Matt has been having a great year with his Forged Precision Sabres. His focus has shifted from racing and competing to just getting out to free skate as much as possible. This has given him the opportunity to go to some awesome freerides. He told us hitting Joachpass was a long time dream…one that he...

Read full strory

Folded Mountains – Almost Raw pt1

Sabre Trucks

09Oct

Sabre Teamrider Yannick Gladow skating tight with fellow Root rider Sebastian Schneider in this sick edit from Root Longboards… literally on the edge!   Yannick hitting some sick lines on Sabre Forged Precision 180’s.

Read full strory

Folded Mountains

Sabre Trucks

17Aug

Before he crashed and hurt himself earlier this summer, Sabre Teamrider Yannick Gladow filmed this edit alongside three teammates from Root Longboards in the French Alps. If you only watch one edit this week… make it this one!

Read full strory

Pierre and Maxim at Marchaux

Sabre Trucks

07Aug

It’s summertime in the French Alps and there’s a freeride almost every weekend! Here’s Pierre Hardiller and Maxim Sorek taking you on a run of the Marchaux Freeride 2015. Both Maxim and Pierre are on Forged Sabre hanger and a mixture of the 38 forged baseplate and 48 lite basplate. Filming and speedboosts by rollerblader...

Read full strory