We’ve been making “TKP” or regular skate trucks since 2013. This year, it was time to make a few changes.

Introducing the new Sabre Street Trucks. 127mm, 153mm, 170mm, 180mm.
The Sabre Street Truck is designed for use on “normal” (ie not longboard) decks. They’re perfect for wheelbases under about 18″, and will work on longer if you use an angled riser.
We’ve had the OG “TKP Truck” for a long time now, and have learnt a lot about how we want a regular truck to skate.
The original TKP Trucks were conceived as a “longboarders TKP truck.” At the time we made it, there was a real thing for knocking bigger kingpins into Indy 215’s and using full-sized longboard bushings. Our original TKP truck was an attempt to refine this concept, and combine it with a slacker, more speed friendly “longboard” geometry.
Unfortunately this produced a very niche truck – great for wider, longer boards under certain conditions, but sub-optimal for shorter skateboards, cruisers and mini-cruisers. Given that an RKP truck is better suited to longer wheelbases anyway, we decided to rethink the geometry and bushing setup on our TKP truck and optimise it for shorter boards.
The major changes are:
1) Steeper Geometry

The new Street trucks feature a steeper pivot angle, creating a turnier truck for most setups. The trucks have a lot more “dive” and a lot less “lean,” feeling much closer to a regular skate truck.
2) Smaller Profile Pivot Cup

We opened up the pivot cup to allow the truck to turn a lot more freely. We’ve also done this with our RKP trucks over the years.
Given that “slop” reduction is a lot less important in a straight-pivot TKP truck like this, we really went for it and loosened the pivot right up to create a super-loose and fun ride. These trucks turn!!!
3) Shorter Baseplate

The baseplate is shorter overall. We’ve lost the adjustable wheelbase of the old TKP truck, which we don’t think is that important on a truck like this. This allows us to make the truck lighter and more compact for transition skating. Dropping in with a shorter baseplate feels way nicer!
You still have new-school and old-school drilling options so these trucks will fit whatever deck you have.
4) Bushing & Washer stack
The bushing and washer setup has had a total overhaul.

We dig the full height bushing on the bottom of our OG TKP truck, so we kept it. But for the top, we’ve specced our new Street Cone, which is much shorter at 10.5mm, with full-capture cup washers top and bottom.
Together with the steeper geometry, this has completely transformed the truck. It feels a lot more lively and fun compared to the OG version, especially on those shorter wheelbases.
The big bottom bushing creates a very “floaty” ride compared to the shorter bottom bushing you will find on all other regular street trucks. It also means you can tap into our entire bushing lineup, using a full-sized longboard cone in there if you wanted even more turn, or even your favourite bushings from another longboard brand.
5) More Kingpin Grind Clearance

A shorter top bushing allows us to have a much shorter kingpin for way more grind clearance. This truck is now fully street and skatepark ready!
6) Lasers

To differentiate is visually from V1, we’ve given the Street Truck a black powder coat, and laser etched-details showing your chosen hanger width. More lasers… what’s not to like about that.
We think the new Sabre Street Trucks are perfect for shorter longboards, cruisers, mini-cruisers and skateboards. That big bottom bushing equates to a great feeling under your feet, and that, for us, is what it’s all about…. trucks that feel better when you skate them. Get a set on your board today!