Yannick with a Koffee Schnapps raw run – hands up!
Thanks to Quirin Ilmer for filming!
Yannick with a Koffee Schnapps raw run – hands up!
Thanks to Quirin Ilmer for filming!
The French Alps were in many ways the birthplace of “modern” downhill skateboarding over a decade ago. Right now there is a new generation of rippers coming up… Our friends Jules Horning and Pierre Hardillier on a road trip with Fulkit Skateboards and 9.81 to produce this record of life on the road in a skate bus across the heart of Europe.
Fulkit Skateboards
9.81
Cult Wheels
Gravity Boardshop
B2 Longboards
Teamrider Yannick Gladow is on it this year… making it to the finals of the incredibly tough Hohenstaufen race on Sabre Cast Precisions.
If you’re in Munich over the summer, be sure you stop in at Boneless Skateshop!
Jernej at the back of the pack, clean lines on Forged Hangers.
Quite honestly… ridiculous. More from Edgar real soon!
Pete Connolly making sure our forged hangers are up to a little speed…
This is how we do it… more info in the Technology section.
Yannick Gladow and friends, hauling ass for fun on a winter training trip.
Yannick and friends clocking some island time…
We are developing a radical new hanger design for our longboard trucks using Cold Forged Technology.

This is the first time that any longboard truck company has used Forging to create a truck hanger.

There are obvious strength benefits over Gravity Casting, and costs benefits compared to CNC.

However, setting up the dies for forging is extremely expensive, so before we hit go on our hangers, we want to be sure that we have nailed the geometry.
Following the same thinking as our original truck protoyping for our cast trucks way back in 2008/2009, we beleive that there’s no testing like skating.

To this end, we have CNC’d a run of hangers that fit into our existing forged and cast baseplates, allowing us to test a range of axle geometries and widths.

These hangers are machined from solid billets of aluminium – they’re not light!

But they do allow us to find the real-world effect of moving the axle position relative to the pivot axis and bushing seat of the tr uck.

It’s one thing to design trucks on paper, but we know that the only way to find out if something really works, is to try it in real like.
Once we have figured out the geometry we want, we’ll be releasing this revolutionary truck to market for you to skate yourself.
Stay tuned!
We wanted to find out how our Forged Baspelates stacked up against the competition.
So we put some in a Hydraulic Ram, and piled the pressure on until they snapped.

Then we repeated the exact same thing with as many other baseplates as we could find.

The results speak for themselves:
| Baseplate | Constuction | Weight | Force at fail |
| Sabre Forged | Cold Forged | 116g | 10994N(1.12 Tons) |
| Sabre Gravity Cast | Gravity Cast | 140g | 10969N (1.11 Tons) |
| Surf Rodz RKP | CNC | 185g | 11092N (1.13 Tons) |
| Paris Truck | Die Cast | 150g | 6901N (0.70 Tons) |
| Randal R-2 | Sand Cast | 137g | 1971N (0.2 Tons) |
Whilst the CNC’d Surf Rodz baseplate took the most to fail, it was also by far the heaviest baseplate on test.
You can immediately see the inferiority of the Sand Cast Randal R2, and to a lesser extent, the Die Cast Paris baseplate.
It demonstrates very strongly that you cannot believe everyone’s marketing – Paris claim to be gravity cast, whilst Randal infer that their product is of a higher quality because it is made in the USA.
Our Hydraulic Press says otherwise.
The Sabre Gravity Cast and Sabre Forged baseplates have the best strength to weight ratio of all the baseplates we tested.
This test is obviously not representative of the forces that you will encounter whilst skating, but it should give you an idea of the relative strengths of each construction method.

After over two years of development and testing, out first longboard trucks are finally available!
Truck Specifications:
190mm Hanger Width. We are the first longboard truck company to offer a cast hanger this wide.
45 Degree Baseplate Angle. Slacker than all other cast trucks on the market right now, we believe 45 degree baseplate angle to be the sweet spot for all kinds of longboarding. Turny enough for cruising, but stable enough for freeride and even downhill, lower angle trucks are the future!

Gravity Casting. Significantly stronger and stiffer than a die cast or “injection molded” truck, Gravity Casting allows us to make a stronger truck, lighter. We don’t like bent axles – this is the best way we’ve found of making cast trucks super-strong. We’ll be heat-treating our hangers and axles too for extra strength.
Flippable hanger. With 4.5mm of rake, you can flip the hanger for more stability at speed. Leave the hanger with positive rake for a divey turn and more grip.

Light Weight. At 470 grams per truck, this is one of the lightest trucks out there right now.
Taller bushings. We use full-height 16mm bushings top and bottom. Most other trucks out there use a 16mm on the bottom, and a 14mm on the top. Using more urethane allows for a deeper turn and more freedom to move. Having the same height bushing top and bottom allows you to switch your bushings around, giving you more tunability and a simplified bushing choice.

Aftermarket bushings as standard. Sabre bushings have been out for a few months now, and are rapidly developing a cult following. We’re the first longboard truck company in the world to step up and put high-spec aftermarket longboard bushings in our trucks – as standard. Too many trucks are let down by crappy stock bushings. Sabres come with the real deal, straight of of the box.
Tested and proven. We’re not happy with designing a truck on paper and going straight to market. So we CNC’d some trucks to skate before we went to mold production.

By CNC’ing the exact shape of the hanger from our production design, we were able to test the strength, bushing seat and geometry of our trucks for months before release. These trucks have been skated in the UK, France, Germany and Switzerland on open roads and IGSA courses. They’re solid and we know you’ll be stoked on them!
Sabre Longboard Trucks are available now from our website now and good skate shops everywhere!