Want to make your longboard trucks turn more and lean harder?
A Sabre Cone/Cone kit consists of two Cone bushings in your choice of durometer for maximum lean and carve.
We also include our washers, as we believe that a bushing is only as good as the washer it works with. Our cup washers really help increase bushing rebound and reduce wheelbite, allowing a softer durometer bushing overall – which in turn gives more turn and lean.
Sabre Bushings are slightly taller than a lot of other longboard bushings out there, which allows for a little more lean and dive. As we use a slightly thinner washer than most other truck brands, the overall stack height works out pretty similar:
| Brand/Truck | Total Stack Height Inc. washers |
| Sabre Standard and Forged | 35.3mm |
| Bear Gen 6 | 34.6mm |
| Carver CX (front and rear) | 34.6mm |
| Paris V3 | 34.6mm |
| Caliber III | 32mm or 37.1mm |
| Pantheon Stylus | 34.2mm |
Another small detail that is worth mentioning is that unlike most other longboard bushings, our longboard bushings are equal heights for the top and bottom bushings. This means that you can switch shapes and durometers easily between trucks, allowing for easier and cheaper experimentation in your quest to find the combo that works for you.
Each kit contains two bushings, two washers and a sticker, packed in a recyclable paper bag. Gravity poured from our own formula in the USA.
Available Durometers:
- 86A Orange
- 90A Purple
- 93A Green
- 96A Grey
Use the table below to select the correct durometer:
– Cruising and Carving
| Skater weight | Durometer |
| 50 – 100 lbs / 23-46kgs | 65A-80A |
| 75 – 125 lbs / 35-57kgs | 80A-85A |
| 100 – 145 lbs / 46-66 kgs | 85A-88A |
| 125 – 175 lbs / 57-80 kgs | 87A-91A |
| 145 – 195 lbs / 66-89 kgs | 88A-94A |
| 175 – 220+ lbs / 80-100+ kgs | 91A-97A |
– Freeride
| Skater weight | Durometer |
| 50 – 100 lbs / 23-46kgs | 68A-80A |
| 75 – 125 lbs / 35-57kgs | 80A-85A |
| 100 – 145 lbs / 46-66 kgs | 84A-88A |
| 125 – 175 lbs / 57-80 kgs | 86A-92A |
| 145 – 195 lbs / 66-89 kgs | 90A-95A |
| 175 – 220+ lbs / 80-100+ kgs | 93A-98A |
– Downhill & TopSpeed
| Skater weight | Durometer |
| 50 – 100 lbs / 23-46kgs | 68A-80A |
| 75 – 125 lbs / 35-57kgs | 80A-85A |
| 100 – 145 lbs / 46-66 kgs | 85A-88A |
| 125 – 175 lbs / 57-80 kgs | 88A-93A |
| 145 – 195 lbs / 66-89 kgs | 90A-96A |
| 175 – 220+ lbs / 80-100+ kgs | 94A-100A |
For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, check out our longboard bushing and truck setup guide.
