siteverNEW

Cone/Barrel Bushing Kit

Product Details

  • Upgrade your trucks to the Sabre Standard
  • Both bushings are 16mm tall – mix and match duros and shapes with no limitations
  • 35.3mm total stack height including washers
  • Kit of 2 bushings and 2 cup washers – enough for one truck
  • Packed with a sticker in a recyclable paper bag

The benchmark in response, agility and stability, our bushing formula is second to none. The Cone/Barrel combo is what we put in most of our longboard trucks.

A Sabre Cone/Cone kit consists of one Cone bushing and one Barrel bushing in your choice of durometer for maximum lean and carve. – to transform your mediocre feeling longboard trucks into something really special.

We also include our washers, as we believe that a bushing is only as good as the washer it works with. Our cup washers really help increase bushing rebound and reduce wheelbite, allowing a softer durometer bushing overall – which in turn gives more turn and lean.

Sabre Bushings are slightly taller than a lot of other longboard bushings out there, which allows for a little more lean and dive. As we use a slightly thinner washer than most other truck brands, the overall stack height works out pretty similar:

Brand/Truck Total Stack Height Inc. washers
Sabre Standard and Forged 35.3mm
Bear Gen 6 34.6mm
Carver CX (front and rear) 34.6mm
Paris V3 34.6mm
Caliber III 32mm or 37.1mm
Pantheon Stylus 34.2mm

Another small detail that is worth mentioning is that unlike most other longboard bushings, our longboard bushings are equal heights for the top and bottom bushings. This means that you can switch shapes and durometers easily between trucks, allowing for easier and cheaper experimentation in your quest to find the combo that works for you.

Each kit contains two bushings, two washers and a sticker, packed in a recyclable paper bag. Gravity poured from our own formula in the USA.

Available Durometers:

  • 86A Orange
  • 90A Purple
  • 93A Green
  • 96A Grey

Use the table below to select the correct durometer:

– Cruising and Carving

Skater weight Durometer
50 – 100 lbs / 23-46kgs 65A-80A
75 – 125 lbs / 35-57kgs 80A-85A
100 – 145 lbs / 46-66 kgs 85A-88A
125 – 175 lbs / 57-80 kgs 87A-91A
145 – 195 lbs / 66-89 kgs 88A-94A
175 – 220+ lbs / 80-100+ kgs 91A-97A

– Freeride

Skater weight Durometer
50 – 100 lbs / 23-46kgs 68A-80A
75 – 125 lbs / 35-57kgs 80A-85A
100 – 145 lbs / 46-66 kgs 84A-88A
125 – 175 lbs / 57-80 kgs 86A-92A
145 – 195 lbs / 66-89 kgs 90A-95A
175 – 220+ lbs / 80-100+ kgs 93A-98A

– Downhill & TopSpeed

Skater weight Durometer
50 – 100 lbs / 23-46kgs 68A-80A
75 – 125 lbs / 35-57kgs 80A-85A
100 – 145 lbs / 46-66 kgs 85A-88A
125 – 175 lbs / 57-80 kgs 88A-93A
145 – 195 lbs / 66-89 kgs 90A-96A
175 – 220+ lbs / 80-100+ kgs 94A-100A

 

For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, check out our longboard bushing and truck setup guide.