Bushings: Rider weight, durometer and speed
With symmetrical truck setups, heavier riders and higher speeds require harder bushings.
Things are not quite so simple with split angle trucks.
First – rider weight.
On a symmetrical setup, lighter riders often need to change to softer bushings to make the board more reactive.
Conversely, heavier riders, need to change to harder bushings to avoid wheelbite and calm the board down to avoid wobble.
Split angle setups change this, as you board is suddenly more stable, and more agile, at the same time.
This means that lighter riders don’t need to worry about the board not turning enough, and heavier riders don’t need to work about wobbles quite so much.
The main reasons to change bushing durometer in a split angle setup are to avoid wheelbite, and change how your board turns.
Next up – wheelbite.
Generally you need the board to be as loose as possible without the wheels ever touching the deck. The more active your board is under you, the more you’ll feel the benefits of split angle trucks.
We recommend that you get as close to wheelbite as you can!
Most important – ride feel and durometer difference
Ride feel is a little more subjective. A bigger durometer difference between the front and rear trucks will change how the board turns, slides and pumps.
A bigger durometer difference – imagine 86A front, 96a back – will have a stronger “return to center” feeling, outlined above. Your board will feel snappier back into grip, it’ll be more stable, and you might find it easier to pump at higher speeds. A bigger split suits high speeds and a more aggressive style.
A smaller durometer difference – perhaps 86A front, 93A back – will be more active under the skater, and feel more agile at slower speeds. It might be easier to pump initially, but once you’re up to speed you might find it harder to maintain.
To some extent, the benefits that split angles bring over symmetrical setups are lessened with a smaller durometer difference – although the truck geometry alone does a lot of the work, so going to a smaller difference only does so much.
We ship our spilt angle truck sets with 93A and 96A bushings for your rear truck, so you can experiment and work out what you prefer. We recommend the 96A for most skaters with the forged hanger, and 93A with the cast hanger, but it’s worth changing it up if you feel like the board isn’t lively enough.