Need to get a bit more magic from your regular skateboard trucks?
A Sabre “Street” kit consists of two Street Cone and two Barrel bushings in your choice of durometer for maximum lean and carve.
Sabre Street Bushings are designed to fit our own Street Trucks, but should work in most regular skate trucks too. For reference, the top Street Cone is 10.5mm/0.4125″ tall, and the bottom Barrel Bushing is 16mm/0.62″ tall. Check your current bushings and washers to see if they fit!
Each kit contains four bushings and a sticker, packed in a recyclable paper bag. Gravity poured from our own formula in the USA.
Available Durometers:
- X-Type (86A Green) “eXtra Turny”
- F-Type (90A Purple) “Freeride”
- R-Type (93A Green) “Race”
- H-Type (96A Grey) “Hard”
- E-Type (99A Yellow) “Extra Hard”
Use the table below to select the correct durometer:
– Cruising and Carving
| Skater weight | Durometer |
| 50 – 100 lbs / 23-46kgs | 65A-80A |
| 75 – 125 lbs / 35-57kgs | 80A-85A |
| 100 – 145 lbs / 46-66 kgs | 85A-88A |
| 125 – 175 lbs / 57-80 kgs | 87A-91A |
| 145 – 195 lbs / 66-89 kgs | 88A-94A |
| 175 – 220+ lbs / 80-100+ kgs | 91A-97A |
– Freeride
| Skater weight | Durometer |
| 50 – 100 lbs / 23-46kgs | 68A-80A |
| 75 – 125 lbs / 35-57kgs | 80A-85A |
| 100 – 145 lbs / 46-66 kgs | 84A-88A |
| 125 – 175 lbs / 57-80 kgs | 86A-92A |
| 145 – 195 lbs / 66-89 kgs | 90A-95A |
| 175 – 220+ lbs / 80-100+ kgs | 93A-98A |
– Downhill & TopSpeed
| Skater weight | Durometer |
| 50 – 100 lbs / 23-46kgs | 68A-80A |
| 75 – 125 lbs / 35-57kgs | 80A-85A |
| 100 – 145 lbs / 46-66 kgs | 85A-88A |
| 125 – 175 lbs / 57-80 kgs | 88A-93A |
| 145 – 195 lbs / 66-89 kgs | 90A-96A |
| 175 – 220+ lbs / 80-100+ kgs | 94A-100A |
For loads more additional info on how to choose bushings and dial in your trucks for the perfect ride, check out our longboard bushing and truck setup guide.
