The third iteration of our ground-breaking Forged Precision hanger is here!
Over 90% stiffer than the original hanger, the MK3 uses the same proven cold-forged 6061 billet, heat treated to T6 for maximum stiffness and less waste.
Our new EN24-T axle studs are stiffer, stronger and more precise than ever. Lathed and ground in the UK to +/- 3 micron and chemically blacked to provide a degree of rust prevention without affecting the tolerance, the bearing platform on the Mk3 hanger is as good as it gets.
The bushing seat has been tightened up slightly compared to the MK2, perfectly fitting our famous hand-poured bushings whilst allowing them to move as freely as possible with minial hanger slop.
The hanger pivot is CNC’d to ensure perfect cylindricity, mating with our custom urethane pivot cup to provide the smoothest turn you’ll find anywhere.
With 3mm of rake, the hangers can be flipped for a lower centre of gravity.
Our MK3 hangers are compatible with all of our baseplates past and present. We are committed to keeping our components compatible and keeping your trucks going for years after you purchase them. Want to bring your MK1 trucks up to date? Just stick some new MK3 hangers on there and you’re set. Want to upgrade your Sabre Standard longboard trucks? A pair of MK3 hangers is what you need.
Each hanger is hand assembled and checked for tolerance by us in the UK.
